HIKVISION D8T Series User Manual - Page 9

Browse online or download pdf User Manual for Security Camera HIKVISION D8T Series. HIKVISION D8T Series 17 pages. Turbo hd turret camera
Also for HIKVISION D8T Series: User Manual (17 pages), User Manual (17 pages), User Manual (17 pages), User Manual (12 pages), User Manual (16 pages), User Manual (15 pages), User Manual (12 pages)

Print Page
HIKVISION D8T Series User Manual
1). Hold the camera body and rotate the enclosure
to adjust the pan position [0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the camera body to adjust the rotation
position [0° to 360°].
2.3 Ceiling Mounting of Type III Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the set screws with a hex wrench (supplied)
to remove the bubble.
4. Fix the mounting base on the ceiling with supplied
screws.
Figure 2-13 Fix the Mounting Base
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and network cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
Figure 2-11 Drill Template
Figure 2-12 Remove the Bubble