GameChanger Audio BIGSBY Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Music Pedal GameChanger Audio BIGSBY. GameChanger Audio BIGSBY 8 pages.

Print Page

FACTORY RESET

To perform a full factory reset of the BIGSBY Pedal (including erasing all saved presets) unplug the

pedal's power supply, then press and hold the SELECT button, plug the power supply back in

and keep holding the SELECT button for 8 more seconds. After 8 seconds you will see a

sequence of lights on the pedal's knobs indicating that the FACTORY RESET has been completed.

WARRANTY & RETURNS

You have a 30 day return period when you may return the product and receive a full refund. You will only

be responsible for return shipping charges. Each BIGSBY Pedal manufactured by Gamechanger Audio is

warranted to be free from defects in materials and workmanship for one year from the date of shipping

or longer if required by the relevant legislation.

This warranty shall not apply to any unit which in the opinion of the manufacturer has been used

improperly or has been mechanically or otherwise damaged by accident, misuse or negligence or has

been altered or repaired in such a way to impair performance, nor shall it apply to cosmetic defects

(considered normal wear and tear).

Other parts, such as knobs, rubbers, cable connectors, are non replaceable. The manufacturer reserves

the right to make changes in the design or construction of this equipment without obligation to install

similar changes in equipment already sold.

For more information, feedback and all other inquiries, please visit

www.gamechangeraudio.com or reach us via e-mail: [email protected]

SAFETY INFORMATION

Warning:

Use only power supplies that can produce at least 250 mA (or higher) of current at 9V DC (center

negative 5.5 x 2.1 mm barrel connector).

This device may be subject to signal interference when operating near high power magnetic ﬁeld

generators, especially when using extended length audio cables, and this is considered normal

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation.

Unauthorized changes or modiﬁcation to this system can void the users authority to operate this

equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Europe:

This product complies with the requirements of Electromagnetic Compatibility Directive 2014/30/EU

For Canada:

NOTICE: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

AVIS: Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

GAMECHANGER AUDIO

Aisteres street 6

Riga, Latvia

LV-1007

[email protected]