GameChanger Audio BIGSBY Snelstarthandleiding - Pagina 8

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} GameChanger Audio BIGSBY. GameChanger Audio BIGSBY 8 pagina's.

Pagina afdrukken

FACTORY RESET

To perform a full factory reset of the BIGSBY Pedal (including erasing all saved presets) unplug the
pedal's power supply, then press and hold the SELECT button, plug the power supply back in
and keep holding the SELECT button for 8 more seconds. After 8 seconds you will see a
sequence of lights on the pedal's knobs indicating that the FACTORY RESET has been completed.
WARRANTY & RETURNS
You have a 30 day return period when you may return the product and receive a full refund. You will only
be responsible for return shipping charges. Each BIGSBY Pedal manufactured by Gamechanger Audio is
warranted to be free from defects in materials and workmanship for one year from the date of shipping
or longer if required by the relevant legislation.
This warranty shall not apply to any unit which in the opinion of the manufacturer has been used
improperly or has been mechanically or otherwise damaged by accident, misuse or negligence or has
been altered or repaired in such a way to impair performance, nor shall it apply to cosmetic defects
(considered normal wear and tear).
Other parts, such as knobs, rubbers, cable connectors, are non replaceable. The manufacturer reserves
the right to make changes in the design or construction of this equipment without obligation to install
similar changes in equipment already sold.
For more information, feedback and all other inquiries, please visit
www.gamechangeraudio.com or reach us via e-mail: [email protected]

SAFETY INFORMATION

Warning:
Use only power supplies that can produce at least 250 mA (or higher) of current at 9V DC (center
negative 5.5 x 2.1 mm barrel connector).
This device may be subject to signal interference when operating near high power magnetic field
generators, especially when using extended length audio cables, and this is considered normal
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this
equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Europe:
This product complies with the requirements of Electromagnetic Compatibility Directive 2014/30/EU
For Canada:
NOTICE: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
AVIS: Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
GAMECHANGER AUDIO
Aisteres street 6
Riga, Latvia
LV-1007
www.gamechangeraudio.com