Gree XK41 Technical Product Manual - Page 6

Browse online or download pdf Technical Product Manual for Controller Gree XK41. Gree XK41 11 pages. Command center for ductfree split systems
Also for Gree XK41: Owner's Manual (19 pages), Owner's Manual (2 pages)

Print Page

FEATURES AND BENEFITS

Command Center (cont.)

Fan Speed

The system fan speed (High, Medium, Low or Auto) can be adjusted for peak room comfort

and quietness.

Room Setpoint

The XK series makes dialing in the correct room setpoint temperature a breeze. Most indoor

units allow a room setpoint from 61° F to 86° F (16° to 30° C).

Timer Mode

When needed, the XK series allows you the ability to program a time period (one-half to

24 hours) to which your system will automatically turn ON or OFF.

Sleep Mode

The XK series will automatically adjust room temperature during your sleep time. This slight

change in temperature will not affect your comfort level due to the natural effects that

sleeping has on the body, but it will save on energy consumption and will lower electric bills.

Turbo Mode

Whether you need to heat up or cool down a room quickly, Turbo Mode will force your system

to run at higher speeds to reach the desired room temperature faster.

X-Fan Mode

The X-Fan function can be activated from the XK series to remove moisture buildup when the

system is turned OFF. This helps prevent mold and mildew growth on your indoor coil and fan.

Privacy Lock

The XK series has a Privacy Lock that can be set to prevent unauthorized access to the unit

controls and prevents tampering with system settings.

Power Failure Recovery

Power interruptions are no problem for the XK series wired controller. All user selections and

system parameters are stored in non-volatile memory. When power is returned, the system

will automatically return to the last operating mode.

Swing Louver Control

The XK series provides control over the motorized discharge air louver to optimize air distribution

throughout the room.

Fahrenheit or Celsius Display

Whether you are more comfortable reading temperatures in Fahrenheit or Celsius, the

XK series can quickly be set up to display either one.

Diagnostic Center

The system has an on-board computer that continuously scans for unacceptable operating

conditions or malfunctions. If such conditions occur, the system takes corrective action or

stops. The fault or status codes will be shown on XK series wired tether controller display

to facilitate easy troubleshooting and repair.