Gree XK41 Manual técnico do produto - Página 6

Procurar online ou descarregar pdf Manual técnico do produto para Controlador Gree XK41. Gree XK41 11 páginas. Command center for ductfree split systems
Também para Gree XK41: Manual do Proprietário (19 páginas), Manual do Proprietário (2 páginas)

Imprimir página
Gree XK41 Manual técnico do produto
FEATURES AND BENEFITS
Command Center (cont.)
Fan Speed
The system fan speed (High, Medium, Low or Auto) can be adjusted for peak room comfort
and quietness.
Room Setpoint
The XK series makes dialing in the correct room setpoint temperature a breeze. Most indoor
units allow a room setpoint from 61° F to 86° F (16° to 30° C).
Timer Mode
When needed, the XK series allows you the ability to program a time period (one-half to
24 hours) to which your system will automatically turn ON or OFF.
Sleep Mode
The XK series will automatically adjust room temperature during your sleep time. This slight
change in temperature will not affect your comfort level due to the natural effects that
sleeping has on the body, but it will save on energy consumption and will lower electric bills.
Turbo Mode
Whether you need to heat up or cool down a room quickly, Turbo Mode will force your system
to run at higher speeds to reach the desired room temperature faster.
X-Fan Mode
The X-Fan function can be activated from the XK series to remove moisture buildup when the
system is turned OFF. This helps prevent mold and mildew growth on your indoor coil and fan.
Privacy Lock
The XK series has a Privacy Lock that can be set to prevent unauthorized access to the unit
controls and prevents tampering with system settings.
Power Failure Recovery
Power interruptions are no problem for the XK series wired controller. All user selections and
system parameters are stored in non-volatile memory. When power is returned, the system
will automatically return to the last operating mode.
Swing Louver Control
The XK series provides control over the motorized discharge air louver to optimize air distribution
throughout the room.
Fahrenheit or Celsius Display
Whether you are more comfortable reading temperatures in Fahrenheit or Celsius, the
XK series can quickly be set up to display either one.
Diagnostic Center
The system has an on-board computer that continuously scans for unacceptable operating
conditions or malfunctions. If such conditions occur, the system takes corrective action or
stops. The fault or status codes will be shown on XK series wired tether controller display
to facilitate easy troubleshooting and repair.
5