agui OKATT DNP16-01 Manual For Installation And Use - Page 9

Browse online or download pdf Manual For Installation And Use for Lifting Systems agui OKATT DNP16-01. agui OKATT DNP16-01 9 pages. Pivoting buffer support

Print Page

DNP16-01

By: E. Irazu.

Reviewed by: J. Fernández

6) INSTRUCTIONS FOR USE:

Before accessing the elevator shaft, elevator pit in the case of low pits, or the elevator roof in the case of

systems with reduced headroom, the maintenance technician must first open the door of the lowest floor

and activate the vertical buffer support. The mechanism is activated and deactivated from floor level without

the need to enter the pit.



Buffer Support activation: This is done by pulling on the green cable. The tube drops down to active

position and the electrical contact only allows operation during elevator review.



Buffer Support deactivation: To deactivate the buffer support, pull on the red cable. As it rises into

place there is a sound indicating that the trigger has blocked the mechanism, it has been deactivated

and the manoeuvre can return to normal operation.

MANUAL FOR INSTALLATION AND USE

DNP16-01. PIVOTING BUFFER SUPPORT

BRAND PRODUCT

If the mechanism does not block correctly

the trigger can be adjusted using the cable

tightener. Turn it to adjust the trigger

position by increasing and reducing its

length and tension.

DEPARTMENT

Rev:2