Airflex5D AF5D-20 User Manual - Page 5

Browse online or download pdf User Manual for Computer Hardware Airflex5D AF5D-20. Airflex5D AF5D-20 17 pages. 2d/3d multi-projector stacking processor

Print Page

6. Passive 3D Display

7.1 System Configuration:

7.2 AF5D Setup for Stereoscopic 3D Display

7.2.1 AF5D should not be set at the side of the projector where the ventilation hot air comes out.

7.2.2 Two projectors can be installed at side by side or Top/Bottom position. Closer lens position will

reduce [4 corner] adjustment range and reduce the loss of the image resolution and brightness.

7.2.3 Setup the polarized film and glasses so that RH/LH eye can only see the scene for one eye.

7.2.4

Use [4 Corner] or [Warp] adjustment Menu to align the images from two projectors completely

together. Place the polarized film in front of the projector before geometry adjustment

 Activate [Image Properties] Menu by Front

Panel keypad or Remote Controller.

 5 items in the menu.

AF5D-20 can decode 3D format from different

3D video sources, including Blue Ray DVD,

STB, Media player, Game and PC... 3D signal

will be decoded by AF5D-20 into signal for Right

or Left eyes. One AF5D-20 can only provide

signal for one projector. RH/LH 3D signals need

be displayed through two projectors. Each

projector will display signal only for one eye.

User needs to set a polarized filter in front of the

projector and also wears polarized glasses. The

glasses need to match the polarized filter in front

of the projectors so that the right eye can only

see the scene for right eye and the left eye can

only see the scene for left eye. A 3D screen is

also required to preserve the polarization of the

image for 3D display. It is possible to use optic

spectrum method similar to Dolby 3D display

using normal 2D screen.