Gamma 6004 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Stringing Machines Gamma 6004. Gamma 6004 20 pages. 6 point mounting
Also for Gamma 6004: Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (19 pages)

Print Page

ASSEMBLY INSTRUCTIONS

Clamp Head Installation

The post of the string clamp head and the tube of the

string clamp base are treated with grease to provide

protection against corrosion during shipping. Remove

any excessive grease with a clean cloth prior to use. The

post and tube may also be cleaned with isopropyl

alcohol. After this type of thorough cleaning, the post

and tube should be treated with a light coating of

machine oil to protect the surfaces against corrosion

and to ensure smooth operation.

Tensioner Installation

Remove the button head screw and washer located at

the end of the tensioner bar with the 3 mm hex wrench

provided. Slide the tensioner onto the bar, being careful

to align the bar with all of the bearings and the drive gear

with the gear track. Replace the button head screw and

washer in the end of the tensioner bar.

Crank Arm Installation

Remove the flat head screw located on the crank shaft

with the 2.5mm wrench provided. Slide the crank handle

over the crank shaft while aligning the holes. Replace

the flathead screw.