Gamma Progression ST II Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression ST II. Gamma Progression ST II 19 pages.
Also for Gamma Progression ST II: Owner's Manual (17 pages)

Gamma Progression ST II Owner's Manual

TROUBLESHOOTING TIPS

PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable
Tensioner moves towards racquet after
brake lever is released
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result
in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp
Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the
diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol
and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.
- Adjust gap between clamp jaws
- Clean clamp jaws
- Clean gripper jaws
- Adjust gripper jaw stop screw
- Clean bottom of clamp & top of turntable with
alcohol
- Adjust clamp base locking nut
-
Clean tensioner disc brake
- Adjust tension brake
- Check tension using a tension calibrator,
adjust machine calibration if necessary
CARE & CLEANING
17
SOLUTION