Gamma Progression STII Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression STII. Gamma Progression STII 19 pages.

Print Page

STRINGING THE FRAME

Pulling Tension

Wrap the loose section of string once around the

roller guide and insert the string between the

diamond dust coated string gripper plates. Pull

the string perpendicular to the gripper plates

while slowly rotating the tensioner crank clock-

wise until the brake lever pops out of the latching

block. The string is now tensioned and can be

clamped in place with the remaining fixed clamp.

Repeat the above steps until all main strings are

installed. Tie off ends of main strings as per

racquet manufacturers recommendations.

Weaving the Cross Strings

Weave the cross strings over and under the

main strings being careful to alternate the

weave direction of each consecutive cross

string so as to be opposite of the previously

installed cross string.

Once the final cross string is tensioned and

clamped, tie off at the appropriate hole speci-

fied by the racquet manufacturer.