Gamma X-Els Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Stringing Machines Gamma X-Els. Gamma X-Els 20 pages.
Also for Gamma X-Els: Owner's Manual (20 pages)

Print Page

STRINGING THE FRAME

Clamping the First Main String

Secure the tensioned main string using the

remaining fixed clamp. Repeat the procedure

for all of the remaining main strings and

tie off following the racquet manufacturers

recommendations.

Follow the manufacturer's recommended

stringing pattern for one or two piece stringing.

This will determine the starting point for the

cross strings. If applicable, tie the first cross

string using an appropriate starting knot.

Weaving the Cross Strings

Weave the cross strings over and under the

main strings being careful to alternate the

weave direction of each consecutive cross

string so as to be opposite of the previously

installed cross string.

Completing the String Job

Once the final cross string is tensioned and

clamped, tie off at the appropriate hole speci-

fied by the racquet manufacturer. Remove the

frame from the mounting system by loosening

the shoulder supports and frame supports.