Centurion SMART GUARD air Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Gate Opener Centurion SMART GUARD air. Centurion SMART GUARD air 12 pages. High security keyless access control
Also for Centurion SMART GUARD air: Operating Instructions Manual (11 pages)
Print Page
Example:
Enable Alarm on Code +
Master Code=
Enter the following keystrokes:
1. Enter Program Mode
2. Select Security Menu
3. Set (Code+1)
4. Clear (*+#)
5. Clear (Wrong Codes)
6. Clear Anti-default
7. Clear Tone Mute
8. Exit Program Mode
Example:
Set Alarm on Wrong Codes. Leave all other functions unchanged.
Master Code=
Enter the following keystrokes:
1. Enter Program Mode
2. Select Security Menu
3. Skip (Code+1)
4. Skip (*+#)
5. Set (Wrong Codes)
6. Skip Anti-default
7. Set Tone Mute
8. Exit Program Mode
14. Backing up the unit
Back up all the user access codes as well as system settings to the
optional PCA12201v1.0 Backup Memory Module.
This allows the system to be easily restored in the unlikely event of
system failure.
Procedure for backing up the unit:
Remove power. Plug the PCA12201v1.0 into the socket provided.
Reapply power. All three LEDs will now be ON. Enter
Code
, then press
The green LED will begin to flash, indicating that the memory is
being backed up. When the backup is complete, a beep will be
heard, and the yellow and green LEDs will turn off. Remove the
Backup Memory Module and keep it in a safe place.
Backing up to a Backup Memory Module will overwrite any
information that was previously contained in that Backup
Memory Module
15. Restoring the unit
Restores all the user access codes as well as system settings from
the optional PCA12201v1.0 Backup Memory Module.
Procedure for restoring the unit:
Remove power. Plug the PCA12201v1.0 into the socket provided.
Reapply power. All three LEDs will now be ON. Enter
Code
, then press
to flash, indicating that the memory is being restored. When the
memory has been restored, a beep will be heard, and the yellow
and green LEDs will turn off. Remove the Backup Memory Module
and keep it in a safe place.
Restoring from a Backup Memory Module will overwrite any
information that was previously contained in the
SMARTGUARDair unit
16. Defaulting the unit
Both the Master Code and the system parameters (timers, alarm
functions, etc.) can be reset to Factory Defaults.
This is useful when the Master Code has been forgotten or the
system parameters are in an unknown state.
Defaulting the Master Code:
Remove power. Reapply power while holding the
two seconds. A beep will then follow, indicating that the Master
Code has been reset to
been enabled, the pairing between the receiver will be broken
during this process. The pairing wll have to be re-established
before the system becomes functional.
Defaulting the System Parameters:
Remove power. Reapply power while holding the
down together for two seconds. A beep will then follow, indicating
that the System Parameters have been reset to the following
Factory Defaults:
Wrong Codes:
Wrong Codes Reset:
Wipeout Timer:
Security Parameters:
1
. Clear all other functions
1 2
3 4
6
1
0
0
0
0
1 2
3 4
6
1
1
on the keypad.
3
1 2
1
2
3
1
2
3
on the keypad. The yellow LED will begin
3 4
. If the anti-default option has
three codes
60 seconds
5 seconds
Anti-default ON, all others OFF
Indicator LEDs
4
Indicator LEDs
4
1
2
Master
Master
key down for
3
and
keys