Centurion SMART GUARD air Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Gate Opener Centurion SMART GUARD air. Centurion SMART GUARD air 12 pages. High security keyless access control
Also for Centurion SMART GUARD air: Operating Instructions Manual (11 pages)
Print Page
Defaulting is not possible if the anti-default option has been set
(see Section 13).
In this case, if the Master Code has been lost, the Master Code
must be defaulted back to
pairing between the SMARTGUARDair and all paired receivers.
This pairing will need to be re-established in order to continue
using the system.
17. Typical mounting instructions:
1.
Remove retaining screw
cover and screws.
2.
Insert screwdriver blade
into groove provided
between the cover and
back panel. Lever
screwdriver forward to
separate the cover from
the back panel.
3.
Fix the self-adhesive rubber
pads into the recesses
provided on the rear panel.
4.
Attach the rear pane to the mounting surface, Anti-knock Shield
or gooseneck with the mounting screws supplied as shown
below.
SMARTGUARDair
wireless access
control keypad
Be sure to seal all the mountings with silicone sealant.
Use only the mounting holes shown. If the other mounting
holes are used, the mounting screws will interfere with the
batteries.
SMARTGUARD
Anti-knock
Shield
Mounting
screws
1 2
3 4
Retaining
screw cover
1
M4 washers
4
Mounting
screws
SMARTGUARDair
backing plate
, which will break the
Self-adhesive
rubber pads
and nuts
2