Gammex 163-DIG User Manual - Page 12

Browse online or download pdf User Manual for Scales Gammex 163-DIG. Gammex 163-DIG 16 pages. Digital compression scale

Print Page

Gammex no longer offers certificates of conformance for scales – please seek out a local metrology

center for routine recertification if required. If adjustments are needed to dial in the scale, follow

instructions below for the calibration process.

Note: Calibration might be required upon first use. This is especially true after an altitude change,

where gravitational force can vary for the same body of mass. Calibration of scales should be

checked over time as mechanical components are subject to wear.

Required equipment:

•

10 kg certified weight or combination of certified weights.

While the 163-DIG is off press and hold the Unit button while holding the Power button until the

display reads CAL. Immediately after, a random set of numbers appear (raw load cell value).

Press Unit again. The display now shows - - - - - - and then flashes the calibration weight to be

used (10 kg).

Place the 10 kg calibration weight on the 163-DIG platform.

When the stable indicator (

- - - - - - followed by the new (raw load cell value).

Press the Power button to turn the scale off and then press the Power button. Calibration is now

complete.

Routine Checks

) is displayed, press the Unit button again and the display shows