CENTURION SYSTEMS G-SWITCH-22 Programming Manual - Page 9

Browse online or download pdf Programming Manual for Control Unit CENTURION SYSTEMS G-SWITCH-22. CENTURION SYSTEMS G-SWITCH-22 10 pages. 2g gsm module

Print Page

Examples

Command

p.xxxx.OU.OU1on

p.xxxx.OU.OU2off

H. Please Call Me Activations

This function will ONLY trigger Relay 1

Examples

Command

p.xxxx.CO.PCMS.

"Please call"

p.xxxx.CO.PCMS.

"call

0811234678"

Tips and Tricks

& You can use the text ''me'' instead of specifying your own number

when adding, deleting, editing or querying your phone.

For example, p.xxxx.AP.me

& If you make a mistake during the programming via a mobile phone,

you will receive an 'error' SMS to let you know

The Module must have sufficient airtime credit to send the SMSs.

Description

Activates Output 1. If OU1 is set as pulsed, the

Output will activate for the configured pulse time If

OU1 is set as latched, it will turn on and remain on.

Deactivates Output 2. If OU2 is set to pulsed, the

command will have no effect. If OU2 is set to

latched, and currently on, it will turn off.

Description

Configures the Module so that a Please Call Me

message from any authorised phone number will

activate Output 1. The incoming please call me

SMS must contain the "Please call" text in order to

trigger output 1.

Configures the Module so that a Please Call Me

message from a specific authorised phone number,

in this case 0811234678, will activate Output 1.

The incoming please call me SMS must contain the

"call 08112345678" text in order to trigger output 1.