KitchenAid KDFE104DSS User Instructions - Page 13

Browse online or download pdf User Instructions for Dishwasher KitchenAid KDFE104DSS. KitchenAid KDFE104DSS 20 pages. Front control dishwasher
Also for KitchenAid KDFE104DSS: User Manual (17 pages)

KitchenAid KDFE104DSS User Instructions
Premium Adjustable 2-Position Top Rack
After removing the culinary tool rack, you can raise or lower the top
rack to fit tall items in either the top or bottom rack. Adjusters are
located on each side of the top rack. Each adjuster has 2 preset
positions.
To raise the rack, press both rack adjusters and lift the rack until it
is in the Up position and level.
To lower the rack,
press both rack
adjusters and
slide the rack to
its Down position
and level.
Removable Top Rack (for SatinGlide
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack
To gain access to the track stops, pull the upper rack forward
about halfway out of the tub.
To open, flip the track stop toward the outside of the tub.
After opening both track stops, pull top rack out of the rails.
Track stop closed
Sliding Bowl Tines
Sliding lower-rack tines that
move left or right to fit your
dishes. You can use this
feature to fit larger items like
cereal bowls and others.
rails)
®
Track stop open
Removable Top Rack (for SatinGlide
The removable top rack
allows you to wash
larger items such as
pots, roasters, and
cookie sheets in the
bottom rack.
IMPORTANT: Remove
dishes prior to removing
the top rack from the
dishwasher.
To remove the rack:
To gain access to the
removable tabs on the
tracks/rails, pull the
upper rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end
of the rack out of the track. Then repeat this step on the other side
to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end out
with a slightly forward, and then upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the
rack's back end attachment tabs with the cutout in the track. Push
down into place.
Pull the tracks completely out, and align the rack's front end
attachment tabs with the cutout in the track. Push down into place.
You will hear a snap when the front end of the rack is secured into
place on each side.
Removable Culinary Tool Rack (3rd level rack)
The removable culinary tool
rack (3rd level rack) allows
you to wash larger items in
the upper rack, or remove
both the culinary tool rack
and top rack to wash larger
times in the lower rack. See
"Removable Top Rack"
section.
To remove the rack:
1. To access track stops,
pull the rack forward until it stops and clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. Place the back rack rollers on each side of the rack into the
track slot and roll the rack back into the tracks.
4. Insert front rack rollers on each side of the rack into the rack
slots.
5. Close track stops on both sides of rack and slide rack back
into dishwasher.
Max rails)
®
A
B
A. Track stop
B. Track
13