Green R/C Model Airplanes Tiger Moth Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Toy Green R/C Model Airplanes Tiger Moth. Green R/C Model Airplanes Tiger Moth 11 pages. The unique almost-ready-to-fly scale 1:7 model of great britain's famous wwii training aircraft
Also for Green R/C Model Airplanes Tiger Moth: Instruction Manual (11 pages)

Print Page

Green R/C Model Airplanes Tiger Moth Instruction Manual

5) Tighten the two mounting

gear and wheel in place at the bottom of the fuselage end. Be sure that the tail gear can rotate

freely in the mounting plate.

6) Finally, connect the pull-pull control cables to the horns on the elevator and the rudder

respectiv-ly. Adjust the tension in the cables by turning the clevises clockwise or

counter-clockwise on the threaded connector.

Step

Step 5. 5. 5. 5. Installation

Step

Installation of of of of the

Installation

Step

* * * * Open

Bag

Bag 5# 5# 5# 5#

*Open

Bag

Bag 13#

13#

1) Mount the aileron control horns and aileron pushrods on the ailerons.

pre-drilled to locate the position of the horns.

2) Refer to Fig. (5), locate and remove the aileron servo access doors. Mount your aileron servos to

the access doors. Long servo horns are needed to get the pushrods outside the slots in the servo

door. You will need two servo extensions and one "Y" connector. The wing panels have pull

strings pre-installed. Tie the pull string to your aileron servo wire extensions and carefully pull

the extensions through the wing panels to the exit holes near the center. Connect your extensions

with the "Y" connector.

3) Connect the aileron pushrods to the aileron servo arms.

4) After installing the servos and connecting the servo extensions, re-install the access doors.

Step

Step 6. 6. 6. 6. Assembling

Step

Assembling

the

Step

Assembling the

the lower

*Open

to get the wing

Bag

Bag 6# 6# 6# 6#

*Open

and

Bag

Bag 7# 7# 7# 7#

Insert the lower wing front

section of the lower wing panel and join the left and right panels tightly together to get the

complete

complete lower

lower

lower wing.

Refer to Fig (6), firstly use the self-tapping screws (W13) to mount the aluminum angle mounts

All manuals and user guides at all-guides.com

screws (L10) to secure the mounting plate (L09) along with the tail

the

aileron

servos

the aileron

aileron servos

servos

to get the lower

lower

lower wing

wing

wing panels

wing

panels

panels with

to get the aileron

aileron

aileron control

control horns

control

Fig.

Fig. (5)

Fig.

(5)

(5) Installing

Installing

Installing the

1. Aileron

2. Aileron horn

5. Access door

lower

wing

and m m m m o o o o unting

and

unting

lower wing

wing and

unting the

wing

wing dihedral

wing

dihedral

dihedral joiners

to get all the hardware needed for assembling the wings.

Bag

Bag 8# 8# 8# 8#

Bag

front

front dihedral

dihedral

dihedral joiner

dihedral

wing.

with

with ailerons

with

ailerons

ailerons (W03).

ailerons

horns

horns (C06) and pushrods

horns

pushrods

pushrods (C07) . . . .

the

the aileron

aileron servos

aileron

servos

servos and

servos

and

and controls

and

3. Pushrod.

6. Long servo arm (not included in kit)

the

wing

struts

the wing

wing struts

struts

joiners

joiners , the wing

wing

wing struts

wing

struts

struts and the wing

struts

joiner

joiner (W04) and rear

rear

rear dihedral

rear

There are holes

controls

4. Aileron servo

wing

wing cabanes.

cabanes.

dihedral

dihedral joiner

joiner (W06) into the root

joiner