Gaoke S1801 Manual - Page 7

Browse online or download pdf Manual for Touch terminals Gaoke S1801. Gaoke S1801 13 pages. Fixed wireless terminal (analogue fax & gprs)

Print Page

Outer electromagnetic rays may interfere with the equipment via radiation or conduction. Some protection

actions should be taken:

Use only single-phase 3-line alternating current power socket with the PE line installed well so

that the filter circuit in the equipment works normally to filter the interference that come from the

electricity network.

Keep the equipment out of the radio transmitters and radar transmitters with high transmission

power and high frequency large current equipments.

Use electromagnetic shielding methods when necessary. For example use the shielded cables.

The cables should distribute inside the office room so as to protect the equipment from being

damaged by high voltage and current caused by thunder. Distributing the cables outside is

strongly discouraged.

3.2 Swift dial

Since GSM call is one time send number, it will send number after receive all numbers. S1801FG will treat

has received all numbers and send number after stop dial 5s. Also add "＃" can treat as received numbers,

then no need wait 5s to send numbers.

3.3

Connect Fax machine to S1801"Phone"port.

During GSM network call only can use one channel (Voice/Data). So it only can support auto reply, not

support manual reply.

When send Fax, dial * and destination number, For example, when need fax to"87654321" fax machine，

then dial "*87654321＃" （＃ is swift dial mode）. When hear fax indicating which means connecting to

machine, press fax machine "start" , then can send fax. Also can use auto send mode, press "start" after hear

ring-back tone.

When receive fax, phone ringing, off_hook hear fax indicating tone then press"start", then to receive fax.

Also can use auto reply mode.

Note ：

GSM analogue Fax only support auto send-receive fax mode, not support manual reply.

The power LED keeps long time on when connect to external power, Off when use battery.

After powered, module initializations, RUN LED quick sparks, 0.25s on 0.25s off; finish

initialization, RUN slow flash, 1 second on 1 second off, indicate device is operational.

When un-insert SIM card or cannot search network, NETWORK LED flash per second, RUN

quick flash; when succeeded in registering network, NETWORK flashes per 1.5s off 0.5s on.

The phone indicator indicates the status of telephone connected to the device. On when off hook,

off when on hook. Charge on when a call succeeds and off when call terminated.

If wrong number or prohibited number is dialed, "Du Du" busy tone will be heard, which means

the user should hang up the phone.

"Signal Intensity" indicator includes 3 lamps. More light on means more strong signal. Under

S1801 Fixed Wireless Terminal User's Manual