Gaoke S1801 Manual - Page 9

Browse online or download pdf Manual for Touch terminals Gaoke S1801. Gaoke S1801 13 pages. Fixed wireless terminal (analogue fax & gprs)

Print Page

4 Keypad configure parameter

notice ：Keypad configure parameter set need off-hook, then on-hook and exit, parameter will auto

save. Indicating tone will inform configure success or failure, if success then release dialing tone, otherwise

release busy tone.

：

*-- begin as *, set; #-- begin as #, cancel, Followed two numbers indicate function code, function code and

content or contents are separated by *

X：digital key, 0~9.

Functions

Adjust incoming call volume

Adjust outgoing call volume

Functions

Input

parameter

password

Functions

Polarity reverse

PIN1

Modify PIN1

Set default parameter

Modify password

S1801 Fixed Wireless Terminal User's Manual

Table 4-1

Adjust voice volume

Parameter

command

##*X#

X：1-5

###X#

X：1-5

Table 4-2

Parameter command

set

##XXXX#

Table 4-3 Modify parameter after enter keypad set

Parameter command

Set

Cancel

*20#

#20#

*71*PIN1#

#71*PIN1#

*72*

old

PIN1*

PIN1*New PIN1#

*81#

**XXXX*XXXX#

（** New password * new

password #）

Specification

X indicates incoming call volume, from 1 to 5, 1

is lowest, 5 is highest.

Password is unnecessary for setting, you will

hear dialing tone if success.

X indicates incoming call volume, from 1 to 5, 1

is lowest, 5 is highest.

Password is unnecessary for setting, you will

hear dialing tone if success.

Keypad set

Specification

Success verify 4-digit password to enter

management(parameter set).

Specification

Send polarity reverse signal for charge

Set－send

Cancel－ no send(default)

PIN1 Max 8-digit, no less than 4-digit.

New

Before modify PIN, PIN under active status

Set default parameter

Password is 4-digit.

Defaulted password is"1234" before factory.

Password cannot delete, only can replace old

password with new password.

Above

only

can

management(parameter set).

operate

after

enter