CORNING LSE 6705 Instruction Manual - Page 4
Browse online or download pdf Instruction Manual for Laboratory Equipment CORNING LSE 6705. CORNING LSE 6705 8 pages. Platform rockers
Also for CORNING LSE 6705: Instruction Manual (12 pages)
Print Page
Do not rock flammable or explosive samples.
The electrical warning symbol indicates the presence of a potential hazard which
could result in electrical shock.
Do not put your fingers between the rocking platform and the housing. Danger of
mechanical injury.
3.0 Installation of the Platform Rocker
3.1 Unpacking
Before starting the installation, carefully examine the rocker for possible damage or missing parts.
Open the box and carefully remove the padding. Check that the rocker has not been visibly
damaged during transportation. Keep the packing material until you ensure that the rocker
works properly.
Carefully lift the device out of the box.
Be sure that the following information is included on the serial label located on the back of
the unit: serial number, catalog number, electrical rating.
Check that the power cord plug has a pin configuration that matches a wall socket
according to the local standard.
Should any kind of damage have occurred during transportation, contact the carrier
immediately. The carrier is responsible for shipping damage.
3.2 Selecting the Location
Put the rocker on a horizontal, leveled, and stable surface.
Leave enough space around the rocker for normal air circulation (6 in./15 cm minimum).
Leave enough space around the rocker for easy access and maintenance.
Avoid locations subject to shocks and vibrations.
Avoid locations subject to frequent power fluctuations or power losses, as this may affect
rocker performance.
Select a location that is dry and not subject to drafts or moving air from heating or air
conditioning vents or air blown by other equipment. Plug the unit into a properly grounded
outlet.
2
CO R N I N G L S E P L AT F O R M R O C K E R S