Makita 4131 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Power Tool Makita 4131. Makita 4131 12 pages. Metal cutter
Also for Makita 4131: Instruction Manual (14 pages), Instruction Manual (12 pages), Instruction Manual (12 pages), Instruction Manual (12 pages)

Print Page
Makita 4131 Instruction Manual
ASSEMBLY
1
1. Dust cover
2. Knob
1
1. Hex wrench
2. Shaft lock
1
2
1. Hex socket head bolt
2. Outer flange
3. Carbide-tipped saw blade
4. Inner flange
1
1. Slot
2. Rib
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing saw blade
005347
2
CAUTION:
•
Use only the Makita wrench provided to install or remove the blade.
Failure to do so may result in overtightening or insufficient tightening of
the hex bolt. This could cause serious injury to the operator.
•
Do not touch the blade with your bare hand immediately after cutting, it
may be extremely hot and could burn your skin. Put on pair of gloves
when removing a hot blade.
To remove the blade, first push and turn the knob which secures the dust cover
clockwise to the
that the blade cannot revolve and use the hex wrench to loosen the hex bolt
counterclockwise. Then remove the outer flange and blade.
005348
2
To install the blade, follow the removal procedure in reverse. Always install the
005349
blade so that the arrow on the blade points in the same direction as the arrow
on the blade case.
BE SURE TO TIGHTEN THE HEX BOLT SECURELY.
4
3
After installing the blade, replace the dust cover. Slide the dust cover carefully
005350
so that the slot of its front fits the rib of the blade case. Make sure the dust
cover fits properly then push and turn the knob counterclockwise to the
symbol.
2
symbol and remove the dust cover. Press the shaft lock so
7