Makita 4131 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 4131. Makita 4131 12 stron. Metal cutter
Również dla Makita 4131: Instrukcja obsługi (14 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony)

ASSEMBLY

1. Dust cover

2. Knob

1. Hex wrench

2. Shaft lock

1. Hex socket head bolt

2. Outer flange

3. Carbide-tipped saw blade

4. Inner flange

1. Slot

2. Rib

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Installing or removing saw blade

005347

CAUTION:

•

Use only the Makita wrench provided to install or remove the blade.

Failure to do so may result in overtightening or insufficient tightening of

the hex bolt. This could cause serious injury to the operator.

•

Do not touch the blade with your bare hand immediately after cutting, it

may be extremely hot and could burn your skin. Put on pair of gloves

when removing a hot blade.

To remove the blade, first push and turn the knob which secures the dust cover

clockwise to the

that the blade cannot revolve and use the hex wrench to loosen the hex bolt

counterclockwise. Then remove the outer flange and blade.

005348

To install the blade, follow the removal procedure in reverse. Always install the

005349

blade so that the arrow on the blade points in the same direction as the arrow

on the blade case.

BE SURE TO TIGHTEN THE HEX BOLT SECURELY.

After installing the blade, replace the dust cover. Slide the dust cover carefully

005350

so that the slot of its front fits the rib of the blade case. Make sure the dust

cover fits properly then push and turn the knob counterclockwise to the

symbol.

symbol and remove the dust cover. Press the shaft lock so