CORNING ONE GX Quick Installation Sheet - Page 11

Browse online or download pdf Quick Installation Sheet for Measuring Instruments CORNING ONE GX. CORNING ONE GX 14 pages. Higher power 40 w dual-band wcs/2.5 ghz tdd das remote
Also for CORNING ONE GX: General Information Manual (12 pages)

Print Page

11.

RF CONNECTIONS

CAUTION! Any open RF port on GX or improper connection

between GX RF ports and combiner inputs, will damage GX

internal power amplifier after the equipment is powered on.

Make sure all connections are performed correctly before

powering.

For direct connections to DAS antennas:

Step 1:

Using the required coax cables, connect the GX RF

ports to the service antennas.

Step 2:

Ensure lightening protection for each antenna port.

Step 3:

Waterproof all RF ports (recommended drip-loops).

Step 4:

Terminate any unused GX and RF ports.

For connections via GX 4-to-1 external combiner

(P/N: AK-GX-ECPL-COMB):

Step 1:

Using the DIN cables (provided with external

combiner), connect each relevant RF output to the

corresponding service connector on the external

combiner.

Step 2:

Ensure lightening protection for each antenna port.

Step 3:

Waterproof all RF ports.

Step 4:

Terminate any unused GX and multiplexer RF ports.

Step 5:

Connect external combiner RF output connector to

broadband antenna. Refer to Figure 13.

Corning Optical Communications

Figure 12. GX Connections to DAS Antennas

Figure 13. GX Connections to External Combiner

Quick Installation Sheet | CMA-581-AEN | Page 11