CORNING ONE GX Quick Installation Sheet - Page 10

Browse online or download pdf Quick Installation Sheet for Measuring Instruments CORNING ONE GX. CORNING ONE GX 14 pages. Higher power 40 w dual-band wcs/2.5 ghz tdd das remote
Also for CORNING ONE GX: General Information Manual (12 pages)

Print Page

10.

GROUND THE UNIT

WARNING! This unit must always be grounded. Consult an

appropriate electrical inspection authority or an electrician if you

are uncertain that suitable grounding is available.

DO NOT CONNECT POWER BEFORE GROUNDING!

Step 1:

Connect the supplied copper wire (CSA 16 mm

GND cable to the GND connector and the

equipment rack or building earth. See Figure 11.

Step 2:

Ground the unit by connecting the "earth wire" of

the power cord to the ground terminal of the AC

supply.

Step 3:

For installations with GX external combiner –

connect the grounding wire supplied with the

external combiner to the earth ground and to the

combiners' grounding lug (see Figure 10).

Corning Optical Communications

)

Figure 11. GX Grounding Connection

Quick Installation Sheet | CMA-581-AEN | Page 10