Bernina Record 830 Workbook - Page 4
Browse online or download pdf Workbook for Accessories Bernina Record 830. Bernina Record 830 16 pages. Workbook 3 creative options
Also for Bernina Record 830: Software Update (14 pages), Brochure (2 pages), Instructions And Tips (4 pages)
Print Page
- 1. Table of Contents
- 2. Setup Program
- 3. Stitch Collage
- 4. Long Stitch
- 5. Tapering Stitches
- 6. Multi-Directional Stitching
- 7. Free-Form Directional Stitching
- 8. All-Over Directional Stitching: Twisted Scrolls (BERNINA 830 Only)
- 9. All-Over Directional Stitching: Trailing Tulip Vines (Artista 730 Only)
- 10. All-Over Directional Stitching: Trailing Tulip Vines (BERNINA 830 Only)
- 11. Monograms
- 12. Artista 640 Functions
- 13. Artista 730 Functions
- 14. BERNINA 820 Functions
Sewing Settings - Thread Tension
Adjust the overall tension setting of your sewing system.
Note: The tension of BERNINA sewing machines is set
at the factory for the best "all around" results using Mettler
Polyester Metrosene thread in the needle & bobbin. If you
regularly use other types of thread, you may find it useful
to adjust your tension settings using the Thread Tension
Adjustment in the Setup Screen.
Customize Favorite Function
Assign the function of your choice to the Favorite Function button.
Touch - Calibrate
Calibrate the touch screen of your sewing system to optimize the sensitivity of the screen.
Software - Language
Access information on the software version installed in your sewing machine & embroidery module.
Messages and Audio Signals
Turn audio signals off/on
Choose from a range of signals for each function:
- Select Stitch
- Select Function
- Upper Thread Control
- Lower Thread Control
- Feed Dog Position
- Presser Foot Position
- Bobbin Winder
- Embroidery Finished
- Thread Cutters
- Threader
Return to Basic Settings
Returns all settings—sewing and/or embroidery—to the original factory settings.
esc and Leave Setup
Closes the Setup Screen without making changes.
Returns to previously selected screen.
7/27/11
Setup Program
Do you know how to:
▪ Choose the signals you want for various
functions?
▪ Return to default settings?
4