Avantes AvaLight-Hal-CAL-Mini Manual - Page 8
Browse online or download pdf Manual for Lighting Equipment Avantes AvaLight-Hal-CAL-Mini. Avantes AvaLight-Hal-CAL-Mini 11 pages.
Print Page
Power LED
The green LED act as status LED for the light source when the power is turned on.
ON-OFF Switch
Choose operating mode with the ON-OFF-switch:
Sphere Coupler
Place the opening of AvaSphere-..-IRRAD around the Sphere coupler.
I/O connector
For automatic disable control to be controlled by software it is needed to connect an AvaSpec
spectrometer to the AvaLight-HAL-CAL-Mini with the interface cable IC-DB26-2.
The signals on the I/O connector are described below.
Pin configuration
Pin
Name
8
Vout
Output
10
GND
11
Disable
Input
Below the electrical characteristics for the input signals.
Electrical characteristics
Name
Disable
Revision: 1-00
© Avantes BV
Switch position
OFF
ON
Description
Nominal 12VDC output
Ground
Input, used to disable/shut down the output
Low level detection
< 1.0V
www.avantes.com
Sphere Coupler
Light source
OFF
ON
High level detection
> 2.0V
Sphere holder
bottom plate
Maximum voltage
13.2V
7