Makita 6805BV Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Power Tool Makita 6805BV. Makita 6805BV 12 pages. Variable speed/reversing
Also for Makita 6805BV: Instruction Manual (8 pages)

Print Page

Removing

installing bit

CAUTION :

Always be sure that the tool is switched off and unplugged before removing or installing

the bit.

To remove the bit, first pull the front cap

off and then pull the bit firmly. To install

the bit, insert

into the tool

far

as it

will go and then replace the front cap.

Depth adjustment

When you wish to drive self drilling screws,

etc.,

adjust the depth

follows. Turn the

locator to adjust the depth.

Initially, adjust the locator to create

dis-

tance of approximately 1 mm

(3/64")

from

the tip of the front cap (which works in

conjunction with the locator) to the base

of the screw head. One full turn of the

locator equals 1 mm (3/64") change in

depth. After adjusting the locator, turn

the adjusting ring

that the 6" mark

i s

aligned with the pointer on the gear hous-

ing. Drive a trial screw into your material

piece of duplicate material. If the

depth i s not

suitable

for the screw, con-

tinue adjusting until the proper depth

set-

ting

i s

obtained.

Adjusting r i n g -

(3/64")

1 mm (3/64")