Makita 6805BV Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 6805BV. Makita 6805BV 12 stron. Variable speed/reversing
Również dla Makita 6805BV: Instrukcja obsługi (8 strony)

Drukuj stronę
Makita 6805BV Instrukcja obsługi
Removing
or
installing bit
CAUTION :
Always be sure that the tool is switched off and unplugged before removing or installing
the bit.
To remove the bit, first pull the front cap
off and then pull the bit firmly. To install
the bit, insert
it
into the tool
as
far
as it
will go and then replace the front cap.
Depth adjustment
When you wish to drive self drilling screws,
etc.,
adjust the depth
as
follows. Turn the
locator to adjust the depth.
Initially, adjust the locator to create
a
dis-
tance of approximately 1 mm
(3/64")
from
the tip of the front cap (which works in
conjunction with the locator) to the base
of the screw head. One full turn of the
locator equals 1 mm (3/64") change in
depth. After adjusting the locator, turn
the adjusting ring
so
that the 6" mark
i s
aligned with the pointer on the gear hous-
ing. Drive a trial screw into your material
or
a
piece of duplicate material. If the
depth i s not
suitable
for the screw, con-
tinue adjusting until the proper depth
set-
ting
i s
obtained.
I
Adjusting r i n g -
\\
1
mm
(3/64")
1 mm (3/64")
1 mm (3/64")
5