Makita BJV180 Technical Information - Page 11

Browse online or download pdf Technical Information for Power Tool Makita BJV180. Makita BJV180 13 pages. Cordless jig saw
Also for Makita BJV180: Parts Breakdown (3 pages), Specification Sheet (2 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Instruction Manual (18 pages)

Print Page

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -5. Armature (cont.)

ASSEMBLING

Note 2: Place the wire connecting portions upside when assembling Endbell complete to Motor housings (R) and (L)

as illustrated in Fig. 38. And route Lead wires of Endbell complete through the space between the cut portions

of Motor housings (R) and (L). (Fig. 39)

Fig. 38

Lead wires

Motor housing (L)

cut portion

[3] -6. Switch

ASSEMBLING SWITCH LEVER TO SWITCH

Note: Be sure to place both of the two projections of Switch inside Switch lever as illustrated to left in

Fig. 40

[Correct]

projection

[3] -7. Lever 17

DISASSEMBLING

1) Remove Handles (R) and (L) and Gear housing cover section. (Figs. 6, 7 in page 4)

2) Disassemble Lever from Gear housing complete as illustrated in Fig. 41.

Fig. 41

Gear housing complete

Stop ring E-5

Lever 17

Remove Stop ring E-5 from the

shaft portion of Lever 17 using

slotted screwdriver or the like.

Motor housing (R)

cut portion

wire connecting portion

Endbell complete

The two projections of

Switch serves as the guide

for Switch lever.

Switch

Switch lever

Turn Lever 17 to the position III

(= large orbital cutting action).

Fig. 39

space between the cut portions

of Motor housing (R) and (L)

[Wrong]

Pull off Lever 17 from Gear housing

complete. Compression spring 3 and

Cap 5 can now be removed from

Lever 17.

P 11/13

Fig. 40

The projection will

be broken if placed

outside of Switch lever.

Compression spring 3

Cap 5