FRISKA Primo Assembly Instructions Manual - Page 6
Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing FRISKA Primo. FRISKA Primo 7 pages. Bluetooth standing desk
Also for FRISKA Primo: Assembly Instructions Manual (7 pages)
Print Page
12.
13.
28
Options for mounting the hand controller:
Fixed or retractable Fixing positions are
marked both on the left hand and right hand
side of the underside of the desktop by pre-
drilled pilot holes to make positioning and fix-
ing the switch easier.
10
Fully
tighten
screws.
Fully
tighten
screws.
O
32
14.
Control box layout
Important - Please read the instructions on the following page and
the note below very carefully before starting this section!
4
I
J
1
A
2
A
15.
RESET PROCEDURE
Lower the frame to its lowest position by pressing the down button on the hand
controller. Release the button. Press the button again and keep it pressed for
10 seconds, the reset is now carried out and the frame is ready to use.
32
3
NOTE All leads MUST be connected into the control box
!
in this specific sequence before connecting the
power lead and switching the power on. Failure
to comply could result in damage to the unit
and invalidate the guarantee. The cable clamps
supplied MUST be securely fixed in the positions
as shown to avoid nuisance tripping of the anti-
collision sensor. Use the wood screws (O) in the
pre-drilled pilot holes provided in the desktop.
0
5
10
!
11