FRISKA Primo Instrukcja montażu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz FRISKA Primo. FRISKA Primo 7 stron. Bluetooth standing desk
Również dla FRISKA Primo: Instrukcja montażu (7 strony)

Drukuj stronę
FRISKA Primo Instrukcja montażu
12.
13.
28
Options for mounting the hand controller:
Fixed or retractable Fixing positions are
marked both on the left hand and right hand
side of the underside of the desktop by pre-
drilled pilot holes to make positioning and fix-
ing the switch easier.
10
Fully
tighten
screws.
Fully
tighten
screws.
O
32
14.
Control box layout
Important - Please read the instructions on the following page and
the note below very carefully before starting this section!
4
I
J
1
A
2
A
15.

RESET PROCEDURE

Lower the frame to its lowest position by pressing the down button on the hand
controller. Release the button. Press the button again and keep it pressed for
10 seconds, the reset is now carried out and the frame is ready to use.
32
3
NOTE All leads MUST be connected into the control box
!
in this specific sequence before connecting the
power lead and switching the power on. Failure
to comply could result in damage to the unit
and invalidate the guarantee. The cable clamps
supplied MUST be securely fixed in the positions
as shown to avoid nuisance tripping of the anti-
collision sensor. Use the wood screws (O) in the
pre-drilled pilot holes provided in the desktop.
0
5
10
!
11