HIKVISION HiLook Series User Manual - Page 8

Browse online or download pdf User Manual for DVR HIKVISION HiLook Series. HIKVISION HiLook Series 18 pages. Smart hybrid light bullet & turret camera
Also for HIKVISION HiLook Series: Quick Start Manual (18 pages), User Manual (18 pages), User Manual (14 pages), User Manual (20 pages), User Manual (13 pages), User Manual (17 pages)

Print Page
HIKVISION HiLook Series User Manual
7. Route the cables through the bottom cable hole or
side cable hole of the junction box and connect the
cables.
8. Fix the junction box cover on its body with three
PM3 × 16 L6 screws.
9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to finish installation.
2.2
Installation of Type II Camera
2.2.1 Ceiling Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the installation
location.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. Loosen the tightening screw, and pull out the clip
plate to dissemble the camera.
4. Install the camera to ceiling.
i. Secure the installation plate to the ceiling with
three PA4 × 25 screws (supplied).
ii. Fit the camera onto the installation plate.
iii. Turn the camera as the figure below until it snaps
into the installation plate.
Figure 2-7 Install Camera to Ceiling
5. Connect the cables.
6. Power on the camera to adjust the view angle
according to the figure below.
Figure 2-5 Fix Cover to Its Body
Figure 2-6
Figure 2-8
Dissemble Camera
Pan Position
[0 ° to 360°]
3-Axis Adjustment
Rotation Postion
[0 ° to 360°]