HIKVISION HiLook Series Kullanıcı Kılavuzu - Sayfa 8

DVR HIKVISION HiLook Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION HiLook Series 18 sayfaları. Smart hybrid light bullet & turret camera
Ayrıca HIKVISION HiLook Series için: Hızlı Başlangıç Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

7. Route the cables through the bottom cable hole or

side cable hole of the junction box and connect the

cables.

8. Fix the junction box cover on its body with three

PM3 × 16 L6 screws.

9. Refer to Step 6 of 2.1.1 Ceiling/Wall Mounting

without Junction Box to finish installation.

2.2

Installation of Type II Camera

2.2.1 Ceiling Mounting without Junction Box

Steps:

1. Paste the drill template (supplied) to the installation

location.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. Loosen the tightening screw, and pull out the clip

plate to dissemble the camera.

4. Install the camera to ceiling.

i. Secure the installation plate to the ceiling with

three PA4 × 25 screws (supplied).

ii. Fit the camera onto the installation plate.

iii. Turn the camera as the figure below until it snaps

into the installation plate.

Figure 2-7 Install Camera to Ceiling

5. Connect the cables.

6. Power on the camera to adjust the view angle

according to the figure below.

Figure 2-5 Fix Cover to Its Body

Figure 2-6

Figure 2-8

Dissemble Camera

Pan Position

[0 ° to 360°]

3-Axis Adjustment

Rotation Postion

[0 ° to 360°]