GARDEN MASTER GM2315 Assembly Instructions Manual - Page 4
Browse online or download pdf Assembly Instructions Manual for Outdoor Storage GARDEN MASTER GM2315. GARDEN MASTER GM2315 8 pages. Sloping roof shed
Also for GARDEN MASTER GM2315: Assembly Instructions Manual (8 pages)
Print Page
If you feel confident that you do not need to read through these instructions, see page 2.... January 2010
If you choose to vary from these instructions your warranty will be impaired.
You need:
2 x (F) Channels
•
3 x (A) Sheets
•
TIP: Put extra fixings in for high
wind area's.
** Particularly on the underside**
A. Join 3 (A) sheets together with 2 fixings thru the overlapping ribs making sure the ends of the sheets
are flush.
B. Cap sheeting with (F) channels putting the cutouts top and bottom same as the front wall.
C. Fix the channels thru the end ribs and then every 2nd rib between.
D. Make sure you put at least 1 fixing per sheet up thru the underside of the channel into the pan of the
sheet.
You need:
2 x (E) Channels
•
3 x (A) Sheets
•
2 x (G) "L"s
•
a. Join 3 (A) sheets together same as the back.
b. Cap sheeting with (E) 2255mm channels.
c. Fix the channels every 2nd rib but not the corners at this stage
d. Place the short flange of the "L" (G) on top of the rib at 1 end. Make sure ends are flush with sheeting
and put 1 fixing in the centre to hold the "L". Fix the corners thru the channels and 1 more between the
corner and the centre fixing. Perform the same at the other end. 5 fixings ea "L"
2: Back Wall
(A)
(F)
3: Roof
(G)
(E)
(F)
(E)
(A)
Pg 4
(G)