Jands Stage 12 Manual - Page 15
Browse online or download pdf Manual for Music Mixer Jands Stage 12. Jands Stage 12 17 pages.
Print Page
Configuring the Console
A 4 way DIP switch accessible through the rear panel enables the user to
change some of the operating parameters of the console. These are as
follows:-
To change the console configuration, remove console power, change
switch positions as desired, and reapply power. Changes will be active
immediately.
Please note that when DIP switch #1 is on, all other switches are ignored.
When DIP switch #4 is on, DIP switch #2 is ignored.
12
#1
Use the STAGE as a slave console to an Event or ESP II
master console.
#2
Reverse the operation of the P2 master fader such that it is at
full when it is at the 0 position. This is used to enable single
action crossfades.
#3
Change the operation of the chase. See page 10.
#4
Single preset wide mode. The console operates as a single
preset console, with flash buttons on the first 24 channels.
(12 for Stage 12)