HIKVISION DS-3WF02C-5N/O Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Network Hardware HIKVISION DS-3WF02C-5N/O. HIKVISION DS-3WF02C-5N/O 16 pages.

Print Page
HIKVISION DS-3WF02C-5N/O Quick Start Manual
Step 2 Go to the device page and click the "Wizard" bar at the top of the page to enter the
"Network" page to set the IP address of the device. In the address field of the LAN IP, fill in
192.168.1.X, X is any integer from 2 to 253, and the address is not used. The subnet mask can be
used by default. Click "Next" when finished.
Step 3 Go to the "Wireless" page. The device can modify the wireless parameters such as network
name, frequency, and key through this page. The default wireless mode of the device is the WDS
Station. The default network name of the device is Wireless_R. When pairing with the WDS Access
Point device, please note that the key and the SSID on the WDS Station side must be the same as
the WDS Access Point. Other configurations are recommended to keep the default values. Click
"Next".
Step 4 Go to the Setup "Wizard – Finish" page and click "Change" to save the configuration.
DS-3WF02C-5N/O Quick Start Guide
Figure 4-2 Wizard – Network
Figure 4-3 Wizard – Wireless
13