Broadata 4802 Series User Manual - Page 7

Browse online or download pdf User Manual for Transmitter Broadata 4802 Series. Broadata 4802 Series 14 pages. Fiber optic dvi extension system

Print Page

BCI 4800/4802 User's Manual

Fiber Optic DVI Extension System

Note: It is recommended NOT to use any intermediate cable or

adapter between units to avoid undesirable performance

degradation.

Note: If you use a laptop or Desktop PC with the PCI Express

graphics card, we recommend using a 5V power adapter for the

transmitter.

4. Connect another 5V power adapter to the receiver. The blue

LED should be on.

5. Plug the receiver into the DVI receptacle of the display.

Note: It is recommended NOT to use any intermediate cable or

adapter between the units to avoid undesirable performance

degradation.

6. Connect each LC multimode fiber one by one as shown in

Figure 3-2.

7. Power on the PC and display.

8. Go to Display Properties in Windows systems and click the

Settings tab. Then select the right display resolution to match

your display. Once you set the right resolution, you can display

the initial screen at the same resolution as it was just before

you powered it on.

Note: If you cannot see the initial screen of the OS system

and have skipped Step 1 and Step 2, you have to follow Step 1

and Step 2 instructions.

9. See processing to adjust the system screen.

Four or Two Fibers

Figure 3-2

Connection of optical fiber.

Broadata Technical Support, (800) 214-0222