Broadata 4802 Series Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Transmissor Broadata 4802 Series. Broadata 4802 Series 14 páginas. Fiber optic dvi extension system
Imprimir páginaBCI 4800/4802 User's Manual
Fiber Optic DVI Extension System
Note: It is recommended NOT to use any intermediate cable or
adapter between units to avoid undesirable performance
degradation.
Note: If you use a laptop or Desktop PC with the PCI Express
graphics card, we recommend using a 5V power adapter for the
transmitter.
4. Connect another 5V power adapter to the receiver. The blue
LED should be on.
5. Plug the receiver into the DVI receptacle of the display.
Note: It is recommended NOT to use any intermediate cable or
adapter between the units to avoid undesirable performance
degradation.
6. Connect each LC multimode fiber one by one as shown in
Figure 3-2.
7. Power on the PC and display.
8. Go to Display Properties in Windows systems and click the
Settings tab. Then select the right display resolution to match
your display. Once you set the right resolution, you can display
the initial screen at the same resolution as it was just before
you powered it on.
Note: If you cannot see the initial screen of the OS system
and have skipped Step 1 and Step 2, you have to follow Step 1
and Step 2 instructions.
9. See processing to adjust the system screen.
8
Four or Two Fibers
Figure 3-2
Connection of optical fiber.
Broadata Technical Support, (800) 214-0222