Avaya 9400 series Application Notes - Page 6

Browse online or download pdf Application Notes for Telephone Avaya 9400 series. Avaya 9400 series 8 pages. Avaya aura communication manager
Also for Avaya 9400 series: Application Notes (11 pages), Quick Reference (3 pages)

Print Page
Avaya 9400 series Application Notes
6. Configure Jabra LINK 14201-20 EHS Adapter
During the compliance test, the Jabra LINK 14201-20 headset adapter was used for the
connection of the Jabra PRO 920 headsets to the Avaya 1400/9400/9500 series digital
telephones.
6.1. Settings
Connect the Avaya digital phone to the digital panel of the Communication Manager system.
Follow the wizard guide to set the PRO 920 headset base unit EHS mode to DHSG and set
"Clear dial tone switch" in "A" position, for more information please refer to headset manual.
6.2. Connection of cables
Connect the cable marked red (already included and attached into the AUX port of the adapter)
to the AUX socket on headset base unit.
Connect the cable marked purple included with the 14201-20 adapter to the ring tone detector
socket in the Jabra Link and place the ring sensor on the area of ringer sound (speaker) on the
desk phone.
Connect the cable included with headset system, with one end to the phone socket in the headset
base unit and the other end to the phone socket on the Jabra Link 14201-20 adapter.
Make sure to select the right cable for Avaya desktop phone, refer to the cable matrix section
included with Jabra LINK adapter. For the Avaya 1400/9400/9500 series digital phone, the cable
marked as "A" has been selected to connect the headset socket on the Jabra Link 14201-20
adapter and the headset socket on the desk phone.

7. Verification Steps

 Pick up and put the PRO 920 wireless headset on. The light of the headset button on the
digital desk phone should now be ON, the audio link indicator on headset base unit
should also be ON, and the dial tone should be heard on the wireless headset.
 From the digital phone with adapter and headset, dial an extension of another Avaya
digital phone and answer the call on that phone.
 Check audio path on the wireless headset and the handset of the other phone is
established.
 End the call above by pressing the Multifunction button on the wireless headset. The
LED of the headset button on the Avaya digital desk phone should be OFF and the audio
link indicator on headset base unit is OFF.
KP; Reviewed:
SPOC 1/13/2012
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
6 of 8
Link14201-20Dig