Fronius RC Panel Pro Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Welding System Fronius RC Panel Pro. Fronius RC Panel Pro 12 pages.
Also for Fronius RC Panel Pro: Operating Instructions Manual (16 pages), Operating Instructions Manual (8 pages)
Print Page
General
Safety
Device Concept
The remote control has the same functionality as the power source's control panel. A pre-
cise description of the possible settings can be found in the power source's Operating In-
structions.
Scope of Supply
Technical data
Notes on Radio
The device is equipped with a wireless module.
Certification
Wireless modules in the USA require FCC certification:
4
WARNING! Incorrect operation and incorrectly performed work can cause seri-
ous injury and damage to property. All work listed in this document may only be
performed by trained specialist personnel. All functions described in this docu-
ment may only be used by trained specialist personnel. All work and functions de-
scribed may only be performed and used once the following documents have
been read and understood in full:
-
This Document
-
All Operating Instructions for system components, especially the safety rules
NOTE! To be able to use the remote control, the welding system must have a
TPS/i power source.
NOTE! Because of firmware updates, certain functions may be available that are
not described in these Operating Instructions or vice versa.
Supply voltage
Protection class
Marks of conformity
Dimensions (l x w x h)
(1)
Remote control
(2)
TPS/i Key Card
(3)
This document
(1)
(2)
(3)
+ 24 V DC
IP 44
CE, FCC
260 x 220 x 60 mm
10.24 x 8.66 x 2.36 in.