Gardena 2516 Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Power Tool Gardena 2516. Gardena 2516 7 pages. Accu shrub shears

Print Page

5.3 Changing the Accu (Fig. D)

3. Remove the cable adaptors

1. Loosen the screws

and

from the accu pack.

remove the blade

4. Insert the new accu pack as

2. Loosen the housing screws

described above but in the

and remove the lower part of

reverse order.

the housing.

6. Disposing of and Recycling Accus

The accu contains lead cells.

Please return the cells to a

After their lifetime have expired,

GARDENA dealer or send them

they may not be disposed of as

directly to one of the GARDENA

normal house rubbish, but must

Service Centres listed on the

be disposed of properly.

rear.

7. Advice for Proper Use / Safety Instructions

Checks before each

Keep the area of work tidy.

Operation

Untidiness in the area of work

can cause accidents.

Inspect the unit before each

use. Do not use the unit if safe-

Make sure that there are no

ty devices and / or the cutting

other people (especially chil-

blade are damaged or worn.

dren) or animals anywhere

Never operate the unit with the

near the working area.

safety devices by-passed or

Do not wear loose clothes,

missing.

jewellery, etc. They could get

Inspect the area to be cut

caught in the machine. Wear

before beginning work. Remove

non-slip shoes, gloves and

any foreign objects. Take care

an eye protection. Wear long

of objects when working. If, in

trousers to protect your legs.

spite of that, you should con-

Ensure you have a secure

tact any obstructions when

foothold during operation of

cutting, turn off the unit and

the machine, especially when

remove the object.

using steps.

Proper Use /

Ensure that you have secure

Responsibility

foothold whilst working.

Attention ! Take extra care

This machine can cause

when walking backwards.

serious injuries!

You may stumble.

Only use the unit for the

Ensure that the motor housing

purposes specified in these

and plug socket are always free

instructions.

of deposits (i.e. leaves, twigs

Do not overload the Accu

etc.).

Shrub Shears – to work better

Do not use the Accu Shrub

and safer do not exceed the

Shears in the vicinity of flam-

given power consumption.

mable liquids and gases.

Keep the guide-handle dry

If the blade get jammed, please

and free from oil and grease.

disconnect the Accu Shrub

Concentrate and work with

Shears and remove the object.

care. You are responsible for

Only work when visibility is

safety in the area of work.

good.

Warning ! Contacts should

never be bridged with

metal ! Short-circuit – fire risk !

Interruptions of Work

Never leave the Accu Shrub

Shears unattended at the work-

ing area. If you interrupt your

work switch off the unit and

store the Accu Shrub Shears

in a safe place. Setting the

safety lock to the 0 position.

If you need to interrupt your

work to move to another work-

ing area, turn off the Shrub

Shears and set the safety lock

to the 0 position.

Always cover the blade with

the blade guard when moving /

transporting the Accu Shrub

Shears.

Check the Environment

Make yourself familiar with

the surroundings and look out

for dangers which you may

not detect due to machinery

noise.

Never use the unit when it is

raining or in damp or wet areas.

Do not operate your Accu

Shrub Shears near swimming

pools or garden ponds.

Notes on Safety

Non-rechargeable batteries

Regarding Accu /

must not be charged with the

Danger of Fire

battery charger (danger of

fire).

Never charge the Accu after

having been heated up by oper-

The Accu Shrub Shears

ation or sun. Let cool down

should not be operated whilst

first.

charging process.

Never expose the unit to direct

Do not throw the used Accu

sunlight while charging.

into fire under any circum-

stances. Danger of fire !

Never charge the Accu any-

where near acids and easily

Never bridge the contacts

inflammable materials.

in the Accu. Danger of short

Danger of fire !

circuits and fire.

Only use the original

If you have any problem with

GARDENA charging device

your Accu Shrub Shears, please

or one authorised by the

contact our Customer Service or

manufacturer.

return the defective unit together

EU Certificate of Conformity

The undersigned

GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm

hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the

harmonised EU guidelines, EU standards of safety and product specific standards.

This certificate becomes void if the unit is modified without our approval.

Description of the unit :

Harmonised European

Accu Shrub Shears

standards:

EN 292 -1

Art. No.:

EN 292 - 2

2516

EN 774

EU directives:

EN 50144 -1 and 2 -15

Machinery Directive 98 / 37/ EC

Noise level :

Electromagnetic Compatibility

measured :

89 / 336 / EC

guaranteed : 78 dB (A)

Low Voltage Directive 73 / 23 / EC

Directive 93 / 68 / EC

Directive 2000 /14/ EC

Description of the unit:

EU directives:

Charging Unit

Electromagnetic Compatibility

89 / 336 / EC

Type:

Low Voltage Directive 73 / 23 / EC

NL 12

Directive 93 / 68 / EC

Art. No.:

Harmonised

2105

European standards:

EN 60335 -1

with a short description of the

problem and, if covered under

guarantee, with a copy of the

receipt, directly to one of the

GARDENA Service Centres

listed on the back of this leaflet.

We expressly point out that,

according to the product lia-

bility law, we are not liable for

any damage caused by our

units if, in case of repair or

exchange, other than original

GARDENA parts are used and

repair is not carried out by a

GARDENA service centre or

an authorised specialist. The

same also applies to spare

parts and accessories.

Year of CE marking:

1998

Ulm, 08.01.2002

77 dB (A)

Thomas Heinl

Technical Dept. Manager

Year of CE marking:

1993

Ulm, 02.08.1999

Thomas Heinl

Technical Dept. Manager