Gardena 2516 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Gardena 2516. Gardena 2516 7 páginas. Accu shrub shears
5.3 Changing the Accu (Fig. D)
3. Remove the cable adaptors
6
1. Loosen the screws
and
from the accu pack.
7
remove the blade
.
4. Insert the new accu pack as
G
2. Loosen the housing screws
described above but in the
and remove the lower part of
reverse order.
the housing.
6. Disposing of and Recycling Accus
The accu contains lead cells.
Please return the cells to a
After their lifetime have expired,
GARDENA dealer or send them
they may not be disposed of as
directly to one of the GARDENA
normal house rubbish, but must
Service Centres listed on the
be disposed of properly.
rear.
7. Advice for Proper Use / Safety Instructions
Checks before each
Keep the area of work tidy.
A
Operation
Untidiness in the area of work
can cause accidents.
Inspect the unit before each
use. Do not use the unit if safe-
Make sure that there are no
ty devices and / or the cutting
other people (especially chil-
blade are damaged or worn.
dren) or animals anywhere
Never operate the unit with the
near the working area.
safety devices by-passed or
Do not wear loose clothes,
missing.
jewellery, etc. They could get
Inspect the area to be cut
caught in the machine. Wear
before beginning work. Remove
non-slip shoes, gloves and
any foreign objects. Take care
an eye protection. Wear long
of objects when working. If, in
trousers to protect your legs.
spite of that, you should con-
Ensure you have a secure
tact any obstructions when
foothold during operation of
cutting, turn off the unit and
the machine, especially when
remove the object.
using steps.
Proper Use /
Ensure that you have secure
A
Responsibility
foothold whilst working.
Attention ! Take extra care
This machine can cause
when walking backwards.
serious injuries!
You may stumble.
Only use the unit for the
Ensure that the motor housing
purposes specified in these
and plug socket are always free
instructions.
of deposits (i.e. leaves, twigs
Do not overload the Accu
etc.).
Shrub Shears – to work better
Do not use the Accu Shrub
and safer do not exceed the
Shears in the vicinity of flam-
given power consumption.
mable liquids and gases.
Keep the guide-handle dry
If the blade get jammed, please
and free from oil and grease.
disconnect the Accu Shrub
Concentrate and work with
Shears and remove the object.
care. You are responsible for
Only work when visibility is
safety in the area of work.
good.
12
G
H
Warning ! Contacts should
A
never be bridged with
metal ! Short-circuit – fire risk !
A
Interruptions of Work
Never leave the Accu Shrub
Shears unattended at the work-
ing area. If you interrupt your
work switch off the unit and
store the Accu Shrub Shears
in a safe place. Setting the
safety lock to the 0 position.
If you need to interrupt your
work to move to another work-
ing area, turn off the Shrub
Shears and set the safety lock
to the 0 position.
Always cover the blade with
the blade guard when moving /
transporting the Accu Shrub
Shears.
A
Check the Environment
Make yourself familiar with
the surroundings and look out
for dangers which you may
not detect due to machinery
noise.
Never use the unit when it is
raining or in damp or wet areas.
Do not operate your Accu
Shrub Shears near swimming
pools or garden ponds.
Notes on Safety
Non-rechargeable batteries
A
Regarding Accu /
must not be charged with the
Danger of Fire
battery charger (danger of
fire).
Never charge the Accu after
having been heated up by oper-
The Accu Shrub Shears
ation or sun. Let cool down
should not be operated whilst
first.
charging process.
Never expose the unit to direct
Do not throw the used Accu
sunlight while charging.
into fire under any circum-
stances. Danger of fire !
Never charge the Accu any-
where near acids and easily
Never bridge the contacts
inflammable materials.
in the Accu. Danger of short
Danger of fire !
circuits and fire.
Only use the original
If you have any problem with
GARDENA charging device
your Accu Shrub Shears, please
or one authorised by the
contact our Customer Service or
manufacturer.
return the defective unit together
EU Certificate of Conformity
The undersigned
GARDENA Kress + Kastner GmbH · Hans-Lorenser-Str. 40 · D - 89079 Ulm
hereby certifies that, when leaving our factory, the unit indicated below is in accordance with the
harmonised EU guidelines, EU standards of safety and product specific standards.
This certificate becomes void if the unit is modified without our approval.
Description of the unit :
Harmonised European
Accu Shrub Shears
standards:
EN 292 -1
Art. No.:
EN 292 - 2
2516
EN 774
EU directives:
EN 50144 -1 and 2 -15
Machinery Directive 98 / 37/ EC
Noise level :
Electromagnetic Compatibility
measured :
89 / 336 / EC
guaranteed : 78 dB (A)
Low Voltage Directive 73 / 23 / EC
Directive 93 / 68 / EC
Directive 2000 /14/ EC
Description of the unit:
EU directives:
Charging Unit
Electromagnetic Compatibility
89 / 336 / EC
Type:
Low Voltage Directive 73 / 23 / EC
NL 12
Directive 93 / 68 / EC
Art. No.:
Harmonised
2105
European standards:
EN 60335 -1
with a short description of the
problem and, if covered under
guarantee, with a copy of the
receipt, directly to one of the
GARDENA Service Centres
listed on the back of this leaflet.
We expressly point out that,
according to the product lia-
bility law, we are not liable for
any damage caused by our
units if, in case of repair or
exchange, other than original
GARDENA parts are used and
repair is not carried out by a
GARDENA service centre or
an authorised specialist. The
same also applies to spare
parts and accessories.
Year of CE marking:
1998
Ulm, 08.01.2002
77 dB (A)
Thomas Heinl
Technical Dept. Manager
Year of CE marking:
1993
Ulm, 02.08.1999
Thomas Heinl
Technical Dept. Manager
G
13