AlienTek DP100 User Manual - Page 11

Browse online or download pdf User Manual for Portable Generator AlienTek DP100. AlienTek DP100 18 pages. Digital power

Print Page

Restore the configuration parameters to

14. Set default

the factory state

15. Version info

Show the software and hardware version

Notes:

① The working voltage is only valid when using the PD/QC power adapter. By default, using

the highest voltage which the adapter can provide. If the adapter can only output a maximum voltage

of 12V, even if setting working voltage to 20V, the actual working voltage can only be 12V.

② USB-A interface mode, in slave mode(USBD), the device can communicate with the PC, and

used to firmware upgrade; Setting to host mode(USBH), it can output 5V/1A, which can be used to

supply power to 5V devices, such as wired/wireless mouse, etc.

4.4.2 Operation instructions

On the main interface, double-click the middle button■to enter the menu interface, then

scroll the wheel to select different menu items, click the ■ to set the parameters of the current

menu item. If the adjustable bit of the parameter is greater than 1, you can click the  or  to

move the parameter highlight position left or right , then adjust the highlighted value by scroll

wheel. After the parameter is adjusted, click the ■ to exit the parameter setting. Timeout (6Sec)

will also automatically Exit parameter setting.

After exiting the parameter setting, long press ■ or click ■ on the "Exit" menu item to

exit the menu interface and return to the main interface . Timeout (6Sec) automatically return to

the main interface.

After entering the parameter setting state, long-press and double-click operations of all

buttons are invalid.

User Manual

DP100 Digital Power User Manual

Table 4.4.1 Menu instructions

High Performance Digital Power

NO/YES

V1.0_1.1