AlienTek DP100 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AlienTek DP100. AlienTek DP100 18 pagina's. Digital power

Restore the configuration parameters to

14. Set default

the factory state

15. Version info

Show the software and hardware version

Notes:

① The working voltage is only valid when using the PD/QC power adapter. By default, using

the highest voltage which the adapter can provide. If the adapter can only output a maximum voltage

of 12V, even if setting working voltage to 20V, the actual working voltage can only be 12V.

② USB-A interface mode, in slave mode(USBD), the device can communicate with the PC, and

used to firmware upgrade; Setting to host mode(USBH), it can output 5V/1A, which can be used to

supply power to 5V devices, such as wired/wireless mouse, etc.

4.4.2 Operation instructions

On the main interface, double-click the middle button■to enter the menu interface, then

scroll the wheel to select different menu items, click the ■ to set the parameters of the current

menu item. If the adjustable bit of the parameter is greater than 1, you can click the  or  to

move the parameter highlight position left or right , then adjust the highlighted value by scroll

wheel. After the parameter is adjusted, click the ■ to exit the parameter setting. Timeout (6Sec)

will also automatically Exit parameter setting.

After exiting the parameter setting, long press ■ or click ■ on the "Exit" menu item to

exit the menu interface and return to the main interface . Timeout (6Sec) automatically return to

the main interface.

After entering the parameter setting state, long-press and double-click operations of all

buttons are invalid.

User Manual

DP100 Digital Power User Manual

Table 4.4.1 Menu instructions

High Performance Digital Power

NO/YES

V1.0_1.1