A&S Studio Bar 200 User Manual - Page 12

Browse online or download pdf User Manual for Speaker System A&S Studio Bar 200. A&S Studio Bar 200 16 pages. 2.1 bar with built-in subwoofer 200

Print Page

Use the AUX Socket

Use a 3.5mm to 3.5mm audio cable (included) to connect an external audio device headphone

socket to the AUX (3.5mm) socket on the unit.

Risk of product damage!

Ensure that the power supply voltage

corresponds to the voltage printed on the back

or the underside of the unit.

Before connecting the AC power cord, ensure

you have completed all other connections.

•

Connect the mains plug of the main unit to a

mains socket.

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

•

Press the

button on the main unit or the

unit on.

•

Press and hold the

switch the main unit back to Standby mode.

•

Disconnect the mains plug from the mains socket if you want to switch the unit off completely.

Note:

If a TV or other external device is connected using the AUX or LINE IN sockets, the main unit will

switch on automatically when the TV or the external device is switched on and playing.

When the unit has no input signal (or weak input signal) for over 15 minutes, it will automatically

switch to Standby mode.

Press the DIMMER button on the remote control repeatedly to select brightness level.

Press the

button on the main unit repeatedly or press the AUX, BT, LINE IN, OPTICAL,

COAXIAL, HDMI ARC buttons on the remote control to select the desired mode. The selected mode

will show on the display.

button on the main unit or press the

button on the remote control to switch the main

button on the remote control to

Phone

Media player