A&S Studio Bar 200 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników A&S Studio Bar 200. A&S Studio Bar 200 16 stron. 2.1 bar with built-in subwoofer 200
Drukuj stronęUse the AUX Socket
-
Use a 3.5mm to 3.5mm audio cable (included) to connect an external audio device headphone
socket to the AUX (3.5mm) socket on the unit.
Power Connection
Risk of product damage!
-
Ensure that the power supply voltage
corresponds to the voltage printed on the back
or the underside of the unit.
-
Before connecting the AC power cord, ensure
you have completed all other connections.
•
Connect the mains plug of the main unit to a
mains socket.
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
/
•
Press the
button on the main unit or the
unit on.
•
Press and hold the
switch the main unit back to Standby mode.
•
Disconnect the mains plug from the mains socket if you want to switch the unit off completely.
Note:
-
If a TV or other external device is connected using the AUX or LINE IN sockets, the main unit will
switch on automatically when the TV or the external device is switched on and playing.
-
When the unit has no input signal (or weak input signal) for over 15 minutes, it will automatically
switch to Standby mode.
Adjust Brightness
Press the DIMMER button on the remote control repeatedly to select brightness level.
Mode Selection
Press the
/
button on the main unit repeatedly or press the AUX, BT, LINE IN, OPTICAL,
COAXIAL, HDMI ARC buttons on the remote control to select the desired mode. The selected mode
will show on the display.
12
/
button on the main unit or press the
button on the remote control to switch the main
button on the remote control to
Phone
Media player