A&S 2.1 Bar with Wireless Subwoofer 300 User Manual - Page 13

Browse online or download pdf User Manual for Subwoofer A&S 2.1 Bar with Wireless Subwoofer 300. A&S 2.1 Bar with Wireless Subwoofer 300 16 pages.

Print Page

Select Equaliser (EQ) Effect

Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control to

select the preset equaliser effects.

•

When CUSTOM (Default) is selected, the COAXIAL indicator will flash (Orange) once.

•

When MOVIE EQ is selected, the OPTICAL indicator will flash (White) once.

•

When MUSIC EQ is selected, the BT indicator will flash (Blue) once.

1. Make sure that the EQ is set to CUSTOM mode.

2. Press BASS/TREBLE on the remote control.

The AUX IN, BT, OPTICAL, COAXIAL and HDMI ARC indicators will flash once.

3. Press VOL+/VOL– to adjust the bass/treble level.

4. After about 5 seconds, the AUX, BT, OPTICAL, COAXIAL and HDMI ARC indicators will flash

once again to indicate that the unit has exited BASS/TREBLE setup.

5. You may now press VOL+/VOL– to adjust volume.

Ensure that the unit is connected to the TV or audio device.

1 While in ON mode, press the SOURCE button on the unit or on the remote control to select the

AUX, OPTICAL, COAXIAL, HDMI ARC mode.

2 Operate your audio device directly for playback features.

3 Press the VOL +/– buttons to adjust the volume to your desired level.

Tip: While in OPTICAL/COAXIAL/HDMI ARC mode, if there's no sound output from the unit and the

OPTICAL/COAXIAL Indicator flashes, you may need to activate PCM Signal output on your source device

(eg. TV, DVD or Blu-ray player).

The first time you connect your Bluetooth device to this player, you need to pair your device to this

player.

Note:

The operational range between this player and a Bluetooth device is approximately 8 meters

(without any object between the Bluetooth device and the unit).

Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

Compatibility with all Bluetooth devices is not guaranteed.

Any obstacle between this unit and a Bluetooth device can reduce the operational range.

If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 During ON mode, press the SOURCE button on the remote control or on the unit to select

Bluetooth mode. The Blue indicator will flash slowly.

2 Activate your Bluetooth device and select the search mode. "A&S Bar 300" will appear on your

Bluetooth device list.