A&S 2.1 Bar with Wireless Subwoofer 300 Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Subwoofer A&S 2.1 Bar with Wireless Subwoofer 300. A&S 2.1 Bar with Wireless Subwoofer 300 16 páginas.

Imprimir página

1. Pairing the Wireless Subwoofer with the Soundbar

Select Equaliser (EQ) Effect

Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control to

select the preset equaliser effects.

•

When CUSTOM (Default) is selected, the COAXIAL indicator will flash (Orange) once.

•

When MOVIE EQ is selected, the OPTICAL indicator will flash (White) once.

•

When MUSIC EQ is selected, the BT indicator will flash (Blue) once.

Adjusting the Bass/Treble Level in CUSTOM EQ mode

1. Make sure that the EQ is set to CUSTOM mode.

2. Press BASS/TREBLE on the remote control.

The AUX IN, BT, OPTICAL, COAXIAL and HDMI ARC indicators will flash once.

3. Press VOL+/VOL– to adjust the bass/treble level.

4. After about 5 seconds, the AUX, BT, OPTICAL, COAXIAL and HDMI ARC indicators will flash

once again to indicate that the unit has exited BASS/TREBLE setup.

5. You may now press VOL+/VOL– to adjust volume.

Play for External Audio Devices

Ensure that the unit is connected to the TV or audio device.

1 While in ON mode, press the SOURCE button on the unit or on the remote control to select the

AUX, OPTICAL, COAXIAL, HDMI ARC mode.

2 Operate your audio device directly for playback features.

3 Press the VOL +/– buttons to adjust the volume to your desired level.

Tip: While in OPTICAL/COAXIAL/HDMI ARC mode, if there's no sound output from the unit and the

OPTICAL/COAXIAL Indicator flashes, you may need to activate PCM Signal output on your source device

(eg. TV, DVD or Blu-ray player).

Bluetooth Operation

Connect to a Bluetooth Device

The first time you connect your Bluetooth device to this player, you need to pair your device to this

player.

Note:

The operational range between this player and a Bluetooth device is approximately 8 meters

(without any object between the Bluetooth device and the unit).

Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

Compatibility with all Bluetooth devices is not guaranteed.

Any obstacle between this unit and a Bluetooth device can reduce the operational range.

If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 During ON mode, press the SOURCE button on the remote control or on the unit to select

Bluetooth mode. The Blue indicator will flash slowly.

2 Activate your Bluetooth device and select the search mode. "A&S Bar 300" will appear on your

Bluetooth device list.