ALIGNER CCD2.0WIFI Installation And Manual - Page 11
Browse online or download pdf Installation And Manual for Test Equipment ALIGNER CCD2.0WIFI. ALIGNER CCD2.0WIFI 16 pages.
Print Page
5 CALIBRATION
5.1 Detectors calibration
The wheel alignment detectors are already calibrated at the factory; moreover, the calibration values are stored
in the CPU memory of the detector itself. Therefore, when installing or replacing a detector, it is not necessary
to calibrate or configure the equipment with calibration data.
The calibration is performed only in case of replacement of transducers or following ascertained repetitive
errors due to movements of transducers (consequently to falls, impacts etc.). Use the following calibration
systems according to the models supplied:
1) STDA14 calibration system
C
2) STDA14T transportable calibration system
E
Legend Figure 15, Figure 16
A) Detector fixing knobs
B) Spirit level
C) Standard calibration tool
D) Thickness 3° for standard calibration stand
E) Transportable calibration tool
F) Thickness 3° for transportable calibration stand
A
B
Figure 15
A
Figure 16
R0368
Cod. R0368 ‐ rev.1.0
(03/2020)
D
F
Page 9/14