Garmin GHP 10 Owner's Manual - Page 19

Browse online or download pdf Owner's Manual for Marine GPS System Garmin GHP 10. Garmin GHP 10 28 pages. Autopilot system, addendum
Also for Garmin GHP 10: Installation Instructions Manual (48 pages), Installation Instructions Manual (26 pages), Declaration Of Conformity (1 pages), Reference (1 pages), Configuration Notes (14 pages)

Print Page

Tacking and gybing from Wind Hold

1. Engage wind hold

(page

13).

2. Select Menu > Tack/Gybe.

3. Select TACK or GYBe.

The autopilot steers your boat through a tack or gybe, and the wind hold

screen shows the compass and wind gauges with yellow highlights that

indicate the direction and progress of the tack or gybe.

TIP: You can begin a tack or gybe directly from the heading hold or wind

hold screen.

Select an option:

• To begin a tack or gybe to port, hold the left and center soft keys for

one second.

• To begin a tack or gybe to starboard, hold the right and center soft

keys for one second.

GHC 10 Owner's Manual

route To

‹

Garmin recommends using route to only under motor power. Using route

to while under sail can cause an unexpected gybe, risking damage to your

sailboat. Unattended sails and rigging can be damaged or cause injury to any

crew or passengers during an unexpected gybe maneuver.

The autopilot steers the boat according to a route defined on your

chartplotter. Your GHC 10 must be connected to a NMEA 2000 or NMEA

0183 compatible chartplotter to use route to.

Using route To

Before you can begin using route to, you must define a route on your

chartplotter. Refer to the owner's manual included with your chartplotter for

information on how to define a route.

From the heading screen, select Menu > Route To.

The autopilot steers your boat along the route defined on your

chartplotter, and the heading screen shows the distance to the next turn ➀

and the distance off course

➋

Sailboat Autopilot Operation

CaUTIOn

➊

➋